Kérdése van? Hívjon minket! +36704033327

Hajdu IND 75F ErP special indirect hot water tank
Hajdu IND 75F ErP special indirect hot water tank
192 856 Ft
NEW

Hajdu IND 75F ErP special indirect hot water tank

Thanks to its renewed exterior, the Hajdu IND 75F ErP Sztea indirect heated hot water tank has an extremely aesthetic appearance. A pipe coil has been placed in the lower part of the tank, making it excellently suitable for producing and storing domestic hot water. It does not contain a heating element, but it is equipped with the option of installing a steatite (ceramic) electric auxiliary heater, which ensures low scale formation, longer service life and lower service costs. Its inner surface is fire-enamelled, so it works perfectly even in places where the water is hard. It can also be used to serve one or more water points. If the water temperature in the tank reaches the set temperature, the controller automatically turns off the heating.

Wall-mounted indirect-heated hot water tank
Can be heated with any boiler or solar collector
Can be retrofitted with a steatite (ceramic) heating cartridge
Has a heat exchanger made of fire-enamelled steel pipe
The polyurethane thermal insulation surrounding the inner tank prevents the water from cooling down quickly
The fire-enamelled inner surface and magnesium active anode corrosion protection ensure a particularly long service life
A safety valve must be installed, but this is not part of the product
Suitable for serving one or even more water points at the same time
The temperature of the stored water can be regulated using a rotary knob
Provides better connection options
Equipped with a circulation nozzle
Easy to maintain
Long service life
Excellent quality
Hungarian product
Energy efficiency rating: C
2-year comprehensive and 10-year tank warranty if certain conditions are met
The image is for illustration purposes only!

In stock: 1 pcs
192 856 Ft
Bonus point : 1 929 Ft
Details

Technical data
Height: 745 mm
Diameter: 515 mm
Depth: 523 mm
Nominal capacity: 75 l
Continuous output: 450 l/h
Continuous output: 18.5 kW
Heat exchanger heating surface: 0.615 m2
Maximum hot water temperature: 65 °C
Peak output: 125 liters/first 10 minutes
Standby energy consumption: 1.1 kWh/24h
Safety valve maximum opening pressure: 7 bar
Heat exchanger nominal operating pressure: 6 bar
Heat exchanger flow resistance: 82 mbar
Minimum network pressure: 0.1 bar
Nominal operating pressure: 6 bar
Heat exchanger connection: G 1
Water connection: G 3/4
Electrical protection: IP X4
Storage loss: 49 W
Contact protection class: I.
Voltage: 230 V
Weight: 38 kg

Info
Article No.:
2141713907
Weight:
38 kg/pcs
Opinions
Be the first to review this product!