Kérdése van? Hívjon minket! +36704033327

Hajdu IND200S ErP steatite indirect hot water tank
Hajdu IND200S ErP steatite indirect hot water tank
350 060 Ft
NEW

Hajdu IND200S ErP steatite indirect hot water tank

The new HAJDU indirect tanks with a capacity of 100, 150, 200 liters are now available in full compliance with ERP directives, in which a coil is located in the lower third of the tank, which indirectly heats the domestic hot water in the tank. Since these devices are suitable for the production and storage of domestic hot water, the inner surface of all tanks is fire-enamelled.

The Hajdu IND200S ERP Sztea Standing 1 heat exchanger indirect storage tank is a floor-mounted, closed-system device. After reaching the factory-set temperature, the temperature controller automatically turns off the heating, so hot water is available for a longer period of time. Thanks to the fire-enamelled finish, a long service life is ensured.
They can be heated with any boiler or solar collector (the latter is recommended for 150, 200 liter versions). A changeover contact regulator is used to control the boiler (solar collector) and the temperature of the stored water, which is factory-set to 65 oC, but a lower temperature can be set after removing the cover of the fitting housing.

HAJDU Zrt. provides a 2-year full warranty and a 10-year tank warranty for the product.

The devices are also suitable for supplying multiple water points simultaneously. The stored hot water is suitable for both bathing and cooking purposes.

In stock: 1 pcs
350 060 Ft
Bonus point : 3 501 Ft
Details

TYPE

Hajdu IND200S ERP Sztea Standing 1 heat exchanger indirect storage tank
Purpose

Closed-type indirect hot water storage tank

Placement

Floor-standing

Voltage

L
200

Heat exchanger heating surface

m2
0.81

Heat exchanger nominal operating pressure

MPa
0.6

Voltage

V
230

Heating power

W
-

Current consumption

- A

Heating time

h
-

Standby energy consumption at 60°C

Kwh/24h
1.79

Water circulation-heat exchanger connection

G3/4

Nominal operating pressure

MPa
0.6

Other protection

Active anodic corrosion protection

Protection degree

IP X4

Contact protection class

I.

Important product specifications

MSZ EN 60335-1, MSZ EN 60335-2-21

Storage and transport requirements

MSZ EN 60721-3

Weight

kg
78.3

Info
Article No.:
2142433113
Weight:
78.3 kg/pcs
Opinions
Be the first to review this product!