Kérdése van? Hívjon minket! +36704033327

Hajdu STXL 300CE DHW tank for heat pump systems, with built-in electric heating, 300 liters
Hajdu STXL 300CE DHW tank for heat pump systems, with built-in electric heating, 300 liters
572 990 Ft
NEW

Hajdu STXL 300CE DHW tank for heat pump systems, with built-in electric heating, 300 liters

The floor-standing, Hajdu STXL 300CE indirect electric heated hot water tank, specifically recommended for heat pump systems, is suitable for serving multiple water points at the same time. It has a large surface steel heat exchanger, thanks to which it is excellently suitable for condensing boilers and low-temperature heating systems. The tank is made of steel sheet, the thermal insulation of which is Freon-free, cyclopentane-propellant polyurethane insulating foam. The indirect tank is protected against corrosion by a titanium-containing fire enamel coating and an active magnesium anode. It has a 2 kW electric heater, which can provide domestic hot water without a boiler or solar collector.

Floor-standing, indirect electrically heated hot water tank
Specifically recommended for heat pump systems
Suitable for heating with any heat generating device
It has a large surface, fire-enamelled steel heat exchanger
After reaching the factory-set temperature, the temperature controller automatically switches off the heating
Its protection against corrosion is provided by fire-enamel coating and active magnesium anode
The polyurethane insulation of the tank prevents the water from cooling down quickly
It has a 2 kW electric heater
It is suitable for serving even several water points
Safety valve is not included with the product
Tank made of steel sheet
Does not have a plug
Long lifespan
Excellent quality
Hungarian product
Energy efficiency rating: C
10-year warranty for tanks, 3-year warranty for other components
The guarantee is subject to the installation of the safety valve!

The picture is for illustration purposes only!

In stock: 1 pcs
572 990 Ft
Bonus point : 5 730 Ft
Details

Technical data
Height: 1530 mm
Width: 660 mm
Depth: 730 mm
Volume: 293 l
Heat exchanger heating surface: 3.3 m2
Nominal heat exchanger volume: 19 l
Electric heating power: 2 kW
Heat-up time from 15 °C to 65 °C: 9.5 hours
Maximum hot water temperature: 80 °C
Standby energy consumption at 65 °C: 2.26 kWh/24h
Required mains connection cable cross-section: min. 1.5 mm2
Nominal operating pressure of the tank: 1 MPa
Nominal operating pressure of the heat exchanger: 0.6 MPa
Water connection: External thread G 3/4
Circulation pipe connection: Internal thread Rp 3/4
Heat exchanger connection: Internal thread Rp 1
Contact protection class: I.
Heat storage loss: 94 W
Electrical protection: IPX4
Voltage: 230 V
Current consumption: 9 A
Weight: 161 kg

Info
Article No.:
2142615201
Weight:
161 kg/pcs
Opinions
Be the first to review this product!